
Snow production
To be able to offer high quality skiing in our resorts right throughout the winter season, we enhance and support our slopes with snow from snow cannons.
The art of producing snow
Snow-making has been a feature of skiing holidays since the 1970s. Over the years the technology has developed enormously, from both a technical and an environmental point of view. Through long-term investments in energy-efficient snow systems, energy consumption has been reduced from seven to just under one kilowatt hour of electricity per cubic metre of snow produced.
What is cannon snow?
Snow from snow cannons consists of round, compact grains which can tolerate usage and heat better than natural snow, making it ideal for maintaining high quality on our pistes.
How do you make snow?
Snow from snow cannons is produced by forcing water at high pressure out of the snow cannon nozzles. The drops of water freeze as gravity forces them downward. The right temperature and air humidity are prerequisites, along with ensuring that the wind is blowing in the right direction.
How snow is made
- Water is pumped from a water source with a pressure of approx. 20 bar or more.
- Air is added at a pressure of approx. 8 bar.
- Air and water are mixed in a nozzle, which then sends the drops of water into the air, forming snow crystals.
- The higher above ground a snow cannon is placed, the better the cooling and distribution of the water drops/snow crystals becomes.
Energy-efficient technology with GPS
To be able to produce the optimal amount of snow in the right place, our piste groomers are fitted with a GPS system that measures the snow depth each day. We have also evened out the ground in our skiing areas so that less snow is required.
We also use automated snow-making systems where we preset the temperature, optimal wind direction, humidity and water temperature. This means that we only produce snow when perfect conditions are present, using technology that ensures a sustainable snow production. It's about producing the right amount of snow at the right place, in as short a time period as possible.
3 facts about snow production
- Snow from snow cannons is more compact and durable than natural snow.
- 10 cm of snow from snow cannons is the equivalent of 60 cm of natural snow.
- With current technology approx. 1 kWh is used to produce a whole 1 m3 of snow.
Once the snow has been produced, it needs to be prepared. Read about preparation here »
Preparation of slopes
When snow from snow cannons has been produced in piles on the ski slopes, it needs to be prepared and spread over the piste. That's the work that our well-trained piste machine drivers do every night.

Do not visit the ski slopes after closing hours
Did you know that after closing hours, it is forbidden to ski, drive any vehicle, bicycle or do other things in the ski areas? The reason is that we are preparing the slopes during these hours. The skiing resort are during these hours considered a work place, and for your own security, all access is prohibited.

Snow guarantee throughout the winter season
Book with confidence with our Alpine Snow Guarantee, valid until the end of the season at our Scandinavian ski resorts.
